Super Vitus 979 road bike

Componants are as follows: SPIDEL 170mm triple crankset, SPIDEL brakeset, Italian TURBO 'Bernard Hinault' saddle, SPIDEL seat post, SPIDEL Aluminium headset, 3ttt handlebars & 3ttt record head stem, SPIDEL bottom bracket, SPIDEL road pedals, SPIDEL rear derailleur, Shimano 600 front mech, SPIDEL/Maillard hubs & quick release skewers, Rigida 19mm clincher rims, Italian Vittoria Roma 19 clincher tyres.

The VITUS frame & forks is made with Aluminium tubing, all original and in superb condition. 

Measurements are as follows: 

Top tube/cross bar centre-to-centre 55cm (Actual length between lugs 52cm) / Crank to seat tube centre-to-centre 55cm / Floor to top tube/cross bar 80cm / Rear stays spacing 130mm / Forks spacing 100mm.

SCAPIN Italian road bike

SCAPIN Italian racer/road bike in very good condition. 18 speed racer with Campagnolo Athena parts. 

Components are as follows:

Campagnolo ATHENA 170mm crankset, Campagnolo ATHENA 52/39T chain rings, Campagnolo ATHENA brakeset (Dual pivot calipers & 2* 9* Ergo levers) , Italian Selle San Marco 'Scapin' fusion saddle, Scapin seat post by Selcof, Richey Logic headset, 3ttt handlebars & ITM head stem, Campagnolo bottom bracket, Campagnolo ATHENA 9 Speed rear derailleur, Campagnolo CHORUS front mech, Campagnolo ATHENA 32 hole hubs & quick release skewers, Campagnolo 6000 Series Alloy-T6 clincher rims, Italian Vittoria Kevlar 3D Compound clincher tyres, Campagnolo 9 speed cassette (13,14,15,16,17,19,21,23,26T ratios).

The SCAPIN frame set is made from Columbus triple curve steel tubing with carbon forks, all paintwork and decals are original. 

Measurements are as follows: 

Top tube/cross bar centre-to-centre 55.5cm (Actual length between lugs 52.5cm) / Crank to seat tube centre-to-centre 56.5cm / Floor to top tube/cross bar 82cm / Rear stays spacing 130mm / Forks spacing 100mm.

1950's Motoconfort ladies town bike

                                 

Vintage 1950's MOTOCONFORT French ladies town bike in excellent condition. It has seen very light use over it's long life due to been kept in dry conditions. 

Components are as follows:

Nervar three arm steel cottered crankset, Vintage centre pull brakeset, Pryma Transat French Leather saddle, Original steel seat post, Motoconfort steel headset, Motoconfort steel handlebars & Pivo head stem, Original block pedals, Huret full chrome rear derailleur, Huret gear lever, Atom hubs & original wing nuts, Rigida 26" Super Cromomix clincher rims, Globe Trotter 26"x1 1/4"clincher tyres, Original chrome encased dynamo lights & Atom 4 speed freewheel cassette.

The MOTOCONFORT frame & forks is made with steel tubing, all paintwork is original and in superb condition for age, including delicate fine line high lighting. 

Measurements are as follows: 

Top legnth, seat tube to headset tube centre-to-centre 55cm (Actual length between lugs 51cm) / Crank to seat tube centre-to-centre 51cm / Floor to top tube/cross bar 77cm.

1970's Holdsworth Road Frame

HOLDSWORTH frame & forks made with Reynolds 531 tubing. The frame colour is 'deep midnight blue' with gold outlining. The rear dropouts are stamped 'BEN REG DESIGN' (on driveside) & 'CYCLO REG DESIGN' (on the left side) along with the frame number '609'. The bottom bracket is 'English threaded' and the frame number '609' is stamped on the driveside (right side) under the BB. 'Campione Del Mondo' decals, unknown model - circa 1970's.

Measurements are as follows: 

Top tube/cross bar centre-to-centre 57cm (Actual length between lugs 54.5cm) / Crank to seat tube centre-to-centre 51cm  / Rear stays spacing 120mm / Forks spacing 95mm.

Hobbs of Barbican frame - circa 1947

Hobbs of Barbican frame & forks is made with Reynolds 531 tubing. Frame number 'C71203' is stamped on the left hand rear dropout, (this dates it to March 1947). The frame colour is 'Jet black'. Fitted with the original Bayliss Wiley bottom bracket & original rare 'Lytaloy' headset...

The frame has been refurbished and new decals added by original owner. 

Measurements are as follows: 

Top tube/cross bar centre-to-centre 57cm (Actual length between lugs 54cm) / Crank to seat tube centre-to-centre 57cm  / Rear stays spacing 115mm / Forks spacing 90mm.